View STF23N80K5_8996600.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

august 2015 docid028292 rev 1 1 / 13 this is information on a product in full production. www.st.com STF23N80K5 n - channel 800 v, 0.23 typ., 16 a mdmesh? k5 power mosfet in a to - 220fp package datasheet - production data figure 1 : internal schematic diagram features order code v ds r ds(on) max. i d p tot STF23N80K5 800 v 0.28 16 a 3 5 w ? industrys lowest r ds(on) x area ? industrys best figure of merit (fom) ? ultra low gate charge ? 100% avalanche tested ? zener - protected applications ? switching applications description this very high voltage n - channel power mosfet is designed using mdmesh? k5 technology based on an innovative proprietary vertical structure. the result is a dramatic r eduction in on - resistance and ultra - low gate charge for applications requiring superior power density and high efficiency. table 1: device summar y order code marking package packing STF23N80K5 23n80k5 to - 220fp tube t o-220f p
contents STF23N80K5 2 / 13 docid028292 rev 1 contents 1 electrical ratings ................................ ................................ ............. 3 2 electrical characteristics ................................ ................................ 4 2.1 electrical characteristics (curves) ................................ ...................... 6 3 test circuits ................................ ................................ ..................... 8 4 package information ................................ ................................ ....... 9 4.1 to - 220fp package information ................................ ...................... 10 5 revision history ................................ ................................ ............ 12
STF23N80K5 electrical ratings docid028292 rev 1 3 / 13 1 electrical ratings table 2: absolute maximum ratings symbol parameter value unit v gs gate - source voltage 30 v i d drain current (continuous) at t case = 25 c 16 a drain current (continuous) at t case = 100 c 10 i dm (1) drain current (pulsed) 64 a p tot total dissipation at t case = 25 c 3 5 w dv/dt (2) peak diode recovery voltage slope 4 .5 v/ns dv/dt (3) mosfet dv/dt ruggedness 50 v iso insulation withstand voltage (rms) from all three leads to external heat sink (t=1 s;t c = 25 c) 2500 v t stg storage temperature - 55 to 150 c t j operating junction temperature notes: (1) pulse width is limited by safe operating area. (2) i sd 16 a, di/dt=100 a/s; v ds peak < v (br)dss , v dd = 80% v (br)dss . (3) v ds 640 v table 3: thermal data symbol parameter value unit r thj - case thermal resistance junction - case 3 .6 c/w r thj - amb thermal resistance junction - ambient 6 2.5 table 4: avalanche characteristics symbol parameter value unit i ar (1) avalanche current, repetitive or not repetitive 5 a e as (2) single pulse avalanche energy 4 00 mj notes: (1) pulse width limited by t jmax . (2) starting t j = 25 c, i d = i ar , v dd = 50 v.
electrical characteristics STF23N80K5 4 / 13 docid028292 rev 1 2 electrical characteristics (t case = 25 c unless otherwise specified) table 5: static symbol parameter test conditions min. typ. max. unit v (br)dss drain - source breakdown voltage v gs = 0 v, i d = 1 ma 800 v i dss zero gate voltage drain current v gs = 0 v, v ds = 800 v 1 a v gs = 0 v, v ds = 800 v, t case = 125 c 50 i gss gate - body leakage current v ds = 0 v, v gs = 20 v 10 a v gs(th) gate threshold voltage v ds = v gs , i d = 100 a 3 4 5 v r ds(on) static drain - source on - resistance v gs = 10 v, i d = 8 a 0.23 0.28 table 6: dynamic symbol parameter test conditions min. typ. max. unit c iss input capacitance v ds = 100 v, f = 1 mhz, v gs = 0 v - 1000 - pf c oss output capacitance - 6 5 - c rss reverse transfer capacitance - 1.5 - c o(tr) (1) equivalent output capacitance v ds = 0 to 640 v, v gs = 0 v - 165 - pf c o(er) (2) equivalent output capacitance v ds = 0 to 640 v, v gs = 0 v - 59 - r g intrinsic gate resistance f = 1 mhz, i d = 0 a - 4.7 - q g total gate charge v dd = 640 v, i d = 16 a, v gs = 10 v (see figure 14: "test circuit for gate charge behavior" ) - 33 - nc q gs gate - source charge - 6 - q gd gate - drain charge - 25 - notes: (1) time related is defined as a constant equivalent capacitance giving the same charging time as c oss when v ds increases from 0 to 80% v dss . (2) energy related is defined as a constant equivalent capacitance giving the same stored energy as c oss when v ds inc reases from 0 to 80% v dss table 7: switching times symbol parameter test conditions min. typ. max. unit t d(on) turn - on delay time v dd = 400 v, i d = 8 a r g = 4.7 , v gs = 10 v (see figure 13: "test circuit for resistive load switching times" and figure 18: "switching time waveform" ) - 14 - ns t r rise time - 9 - t d(off) turn - off delay time - 48 - t f fall time - 9 -
STF23N80K5 electrical cha racteristics docid028292 rev 1 5 / 13 table 8: source - drain diode symbol parameter test conditions min. typ. max. unit i sd source - drain current - 16 a i sdm (1) source - drain current (pulsed) - 64 a v sd (2) forward on voltage v gs = 0 v, i sd = 16 a - 1.5 v t rr reverse recovery time i sd = 16 a, di/dt = 100 a/s, v dd = 60 v (see figure 15: "test circuit for inductive load switching and diode recovery times" ) - 410 ns q rr reverse recovery charge - 7 c i rrm reverse recovery current - 34 a t rr reverse recovery time i sd = 16 a, di/dt = 100 a/s, v dd = 60 v, t j = 150 c (see figure 15: "test circuit for inductive load switching and diode recovery times" ) - 650 ns q rr reverse recovery charge - 10 c i rrm reverse recovery current - 32 a notes: (1) pulse width is limited by safe operating area. (2) pulse test: pulse duration = 300 s, duty cycle 1.5%. table 9: gate - source zener diode symbol parameter test conditions min. typ. max. unit v (br)gso gate - source breakdown voltage i gs = 1 ma, i d = 0 a 30 - - v the built - in back - to - back zener diodes are specifically designed to enhance the esd performance of the device. the zener voltage facilitates efficient and cost - effective device integrity protection, thus eliminating the need for additional external componentry.
electrical characteristics STF23N80K5 6 / 13 docid028292 rev 1 2.1 electrical characteristics (curves) figure 2 : safe operating are a figure 3 : thermal impedance figure 4 : output characteristics figure 5 : transfer characteristics figure 6 : gate charge vs gate - source voltage figure 7 : static drain - source on - resistance
STF23N80K5 electrical characteristics docid028292 rev 1 7 / 13 figure 8 : capacitance variations figure 9 : normalized gate threshold voltage vs temperature figure 10 : normalized on - resistance vs temperature figure 11 : normalized v(br)dss vs temperature figure 12 : maximum avalanche energy vs temperature
test circuits STF23N80K5 8 / 13 docid028292 rev 1 3 test circuits figure 13 : test circuit for resistive load switching times figure 14 : test circuit for gate charge behavior figure 15 : test circuit for inductive load switching and diode recovery times figure 16 : unclamped inductive load test circuit figure 17 : unclamped inductive waveform figure 18 : switching time waveform
STF23N80K5 package information docid028292 rev 1 9 / 13 4 package information in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
package information STF23N80K5 10 / 13 docid028292 rev 1 4.1 to - 220fp package information figure 19 : to - 220fp package outline
STF23N80K5 package information docid028292 rev 1 11 / 13 table 10: to - 220fp package mechanical data dim. mm min. typ. max. a 4.4 4.6 b 2.5 2.7 d 2.5 2.75 e 0.45 0.7 f 0.75 1 f1 1.15 1.70 f2 1.15 1.70 g 4.95 5.2 g1 2.4 2.7 h 10 10.4 l2 16 l3 28.6 30.6 l4 9.8 10.6 l5 2.9 3.6 l6 15.9 16.4 l7 9 9.3 dia 3 3.2
revision history STF23N80K5 12 / 13 docid028292 rev 1 5 revision history table 11: document revision history date revision changes 28 - aug - 2015 1 first release.
STF23N80K5 docid028292 rev 1 13 / 13 important notice C please read carefully stmicroelectronics nv and its subsidiaries (st) reserve the right to make changes, corrections, enhancements, modifications , and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant information on st products before placing orders. st products are sold pursuant to sts terms and conditions of sale in place at the time of or der acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and s t assumes no liability for application assistance or the design of purchasers products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information se t forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2015 stmicroelectronics C all rights reserved

▲Up To Search▲

Price & Availability of STF23N80K5

	To Download STF23N80K5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .